Sprinkler problems can drive you crazy, this may be the sprinkler head of the broker today, and the next day it may be a rush to buy the pipe. One day, your lawn looks like a smooth green carpet, and then you wake up in a barren wasteland, wondering what happened. Once the lawn looks like garbage, you will stand out as "that guy" on the street, regardless of what his lawn looks like. Don't that guy! Due to a big mistake, most people start to feel helpless when they encounter print head problems... They look at the print head system as a whole, rather than several components that make up the print head system.

In this article, we will focus on sprinklers. When you encounter a nozzle problem, the first thing you should pay attention to is to determine what the real problem is? If you see huge sprinklers popping up around the corner of the yard, try to turn off the water and reach the sprinklers directly. Maybe someone hit the sprinkler head, or maybe you hit it with a lawn mower last week and didn't notice until now. In this case, the problem is the sprinkler itself, not the clock, wire, or sprinkler timer.

Sprinklers are an integral part of sprinkler systems that usually cause sprinkling problems. It consists of separate parts like the body, all parts can be put into it. Inside the body are shafts and springs, although water flows upwards. At the top is the actual spray head, which is screwed into the shaft and determines the spray mode and length of the spray head.

In most cases, you can replace the broken sprinkler head, such as replacing a broken nozzle (if it is cut). Even if the entire sprinkler is replaced, it should be simply unscrewed and replaced with a new sprinkler. Let yourself carry out this process easily, shaking and twisting the nozzles to push the dirt away and give yourself some space to replace the nozzles without having to dig deeper.

If you happen to need to dig out the nozzle to solve the nozzle problem, please make a good large circumference so that there is enough space to reach your hand here. Nothing is more frustrating than trying to reverse and frustrate with only a few inches of movement.

After replacing the nozzle, please wait until it is tested before closing the hole. Many times, someone thought they solved the nozzle problem, but then realized that they had to dig up the nozzle again because they didn't tighten the nozzle properly.

Hide Comments | Add Comment